High efficiency waste to oil tyre pyrolysis plant

Technical Parameter

Items Contents
Raw material Waste tyres, scrap plastic, waste rubber
Structure form Horizontal
Model HY-6T HY-8T HY-10T
Size of reactor D2200mm*L6000mm D2600mm*L6600mm D2800mm*L6000mm
24-hour capacity 6 tons 8 tons 10 tons
Operating pressure Constant pressure
Heating material Coal, charcoal, fuel gas, fuel oil
Average out-put oil rate 45%-50%
Material of reactor Q345R boiler plate
Thickness of reactor 16mm/18mm
Rotate speed of reactor 0.4 turn/minute
Mode of cooling Water cooling
Power in total 20 Kw
Life 5-8 years

Packaging & Delivery

Packaging Details: 40’FR + 40’HQ
Delivery Detail: 15 days after receiving advance payment

   Xinxiang Huayin Renewable Energy Equipment Co., Ltd is specialized in manufacturing waste management equipments. After years’ research, experiment and improvement, we have the honor to introduce you waste tire pyrolysis plant, waste plastic pyrolysis machine, waste oil distillation machine and decoloring device. Instead of landfill or burning, this is a green technology recycling waste tire and waste plastic to oil. We are the only one company which has 2000 square meters of refining demonstration site in this industry. And also are the only one firm with Christian background. Has an independent laboratory and 30 technicians. Specialty and quality always be our pursue.

    1.We can get tyre oil,carbon black,and steel from waste rubber tyres and plastics.
    2. High oil output rate 45%-55%, the rubber up to70 %.
    3. Perfect cool effect, we have two horizontal condensers, the cooling area up to 26.874 square meters, the area larger, the more oil u can get.
    4. Large capacity: 6tons / 8tons / 10tons / 12tons
    5. Safety device, we have automatic alarm bells with pressure gauge, If pressure gauge more than the pressure, bells will ring.
    6. Environmental protection, no pollution, no smell
    7. 6-8 years life, 2 years warranty
    1.Working process
    1. Waste plastic refining flow: automatic feeding → catalytic cracking→ oil-water separation → cooling liquid → crude oil → flammable gas recovery → flammable gas combustion → desufuration and dust removal
    2. Waste tires refining flow: automatic feed → catalytic cracking → oil-water separation → cooling liquid → carbon black emission → carbon black processing → crude oil → flammable gas recovery → flammable gas combustion → desulfuration removal.
    3.Working period
    A. Raw material feeding — 2 hours.
    B. 2 hours after feeding, it begins to extract oil and lasts 10 hours.
    C.Slagging and steel wire discharge – –2 hours
    D. No need cool down reactor, begin to next batch
    4.Main characters
    1.Heating system
    Using Q345R boiler steel and the thickness is 14mm and 16mm,the thickness would be changed according the customers’requirments. The main engine use horizontal-type of 360°structure-0.4 r/min
    2.Separation system
    Catalyst chamber and oil water separator
    Depart the heavy oil and impurities from the oil gas to purify the oil.
    3.Condensing system
    Generally speaking , for all the raw material all be finished by heating to gasification and cracking, and then cooling to get oil, so the key is the relationship between the yield rate and condensation. So the best and easy way is to improve the condenser cooling effect so as to get higher yield rate.
    4.Dedusting system
    Complete dust removal system
    Desulfurization dedusting:remove the sulphur(when use coal as fuel) and dust
    Water purification: for the second removal.
    5.Waste gas recycles system
    Gas collecting system
    In the process of refining oil, when the gas is heated up to 150 , it will produce a large amount of gasCH4& C4H8 ,which cannot convert to liquid at normal temperature and normal pressure. However, these gases can be used as fuel, which is not only environment protection but also energy conservation
    6.Carbon black recycles system
    Vacuum carbon black slagging system
    The solid residual will be left after the catalyst splitting from scrap plastic, approximately take up 5% of the waste tire.
    Its main component is the black carbon, which can be used as raw materials in industry, as well could be mixed with the pulverized coal ash to produce the raw material of the thermal power plant, and also could be applied to the manufacturing of the pulverized coal ash brick (one kind of environmental protection building material).

     Waste Tire Recycling Machine
     Pyrolysis Plant

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s