Packaging & Delivery:
|Packaging Detail:||40’FR + 40’HQ|
|Delivery Detail:||15 days after we get the deposit|
2012 hot sale waste/used plastic Pyrolysis to Oil plant
safe, environmental, energy-saving
Raw materials and output information:
|Raw material||Oil yield||Steel wire||Carbon black||water|
|Waste tire/rubber||Big tyres||45%-50%||15%-20%||30%||5%-10%|
|Bicycles and motorcycles tyres||30%-35%||5%-10%||45%||5%-10%|
|Waste plastic||Fishing net||50%-60%||30%|
|Safety net, farm-oriented film||45%-50%||30%|
|Convenient bags, weave bags||40%||25%|
|Off-cut of recycled paper mill||20%-30%||20%|
Three links and final products of tyre pyrolysis to oil plant:
|Second||distillation||diesel and gaslion|
|Third||Deodorant and decolor|
First step, make the reactor rotate clockwise 0.4 per minute, put raw materials into reactor automaticly, close the feeding door tightly.
Second step, burn the fuel materials( like coal, wood, natural gas,oil etc ) in the furnace. The reactor will be heated slowly. when the temperature reaches nearly 180℃, the oil gas will come out and then go to the cooling system and liquefying to oil.Some incondensable gas which can’t cooling down will flow to furnace through a pipe which can be used to heat the reactor. In this way, you can save much more energy as you use energy for heating only in the first 2 hours. After the first 2 hours, the main fuel is gas. After pyrolysis, all the oil gas will come out from reactor, the temperature will falling down. Then make the rotate anticlockwise, carbon black discharging begins.
Last step,when the temperature falls to 50℃, worker can open the door of the reactor and take steel wire out.