About pyroiysis plant
As the saying goes: One thing must be on both sides. With the social modernization increasing development, for one thing, the plastic industry has been developed vigorously and the plastic products have been widely used in all our daily life. For another, more plastic articles are produced and accumulated to big amount as a result of erode-resistant characteristic of the plastic, which are posing a big public hazard to the environment and hygiene. What is worse, the problem has become more serious in recent years. Huayin waste plastic to oil pyrolysis machine can help you to reduce the environmental pollution and create huge financial profit.
Automatic working process of waste plastic to oil pyrolysis machine
a. Use auto-feeder to feed the waste tires into reactor automatically, seal the feeding inlet door tightly.
b. Heat the reactor by burning the following fuel material: coal, wood, natural gas, or fuel oil in the combustion system. The reactor will be heated slowly, when the temperature reaches around 250 degree Celsius, the oil gas will be formed.
c. After processed by huayin waste tire recycling pyrolysis plant, the oil gas will go to the cooling system to be liquefied. The gas which can not be liquefied under normal pressure will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy.
d. After finishing oil collecting, the temperature of reactor will be down, while, carbon black can be discharged automatically at the same time.
e. when the temperature falls down to 100 degree Celsius, workers can open the door of reactor to discharge the steel wire.
f. Start another batch working.
|Raw material||Waste tyres, scrap plastic, waste rubber|
|Size of reactor||D2200mm*L6000mm||D2600mm*L6600mm||D2800mm*L6000mm|
|24-hour capacity||6 tones||8 tones||10 tones|
|Operating pressure||Constant pressure|
|Heating material||Coal, charcoal, fuel gas, fuel oil|
|Average out-put oil rat||45%-50%|
|Material of reactor||Q245R/Q345R boiler plate|
|Thickness of reactor||16mm|
|Rotate speed of reactor||0.8 turn/minute|
|Mode of cooling||Water cooling|
|Power in total||20 Kw|
pyrolysis plant specific features
1.Since huayin waste tyre recycling pyrolysis plant have auto-feeder, you do not need to crush tires by manpower. Our machine can feed the raw materials into reactor automatically. It saves labor and improves productivity.
2. Two water sealing devices with safety-valve and auto-alarming device, vacuum device ensure worker’s safety.
3. Specialized catalyst chamber improves oil yield and oil quality.
4. Tail gases can be recycled to furnace. In this way, you will save more energy. For another way, it’s environmental friendly.
5. All cooling waters are circulatory.
6. Flue gases are processed by dust removal device and each emission standard without pollution.
All the-aboved waste tyre yo oil pyrolysis process, Huayin waste plastic to oil pyrolysis machine could be able to Automatic feeding, automatic slag, automatic alarm, automatic decompression, automatic adjustment of negative pressure, exhaust automatic recovery.
Higher oil yield rate
Huayin tire pyrolysis plant adopted the most advanced independent cooling system we concentrate on pre-long the cooling time and increase cooling area so that cool more oil gas and get more oil. Besides we use catalyst when we pyrolysis tire, so that we can make fully pyrolysis for tires and increase make full use of the tire materials and make good quality oil. At same time with our 20 years experience of making tire oil, our engineer can transfer our best operation skills which how can make more oil.
Select huayin, select high-efficiency
Huayin waste plastic to oil pyrolysis machine for your service save your time, energy conservation, environmental protection and safety.
see more at :