High oil yield waste tire/plastic pyrolysis plant with excellent cooling system

Recent years, more and more people invested in waste tire/plastic recycling, on the market, there are a great many of equipment supplier, we call the equipment waste tire/plastic pyrolysis plant. Every one who invested in this project or want to invest in, may know the basic information of this plant, at least they know what the plant works for. This plant is used to extract crude oil from waste tire/plastic by pyrolyzing. I believe all investors are willing to make more profit from this plant, how to do this? Of course, more oil, more profit, but how can we get more oil. Generally speaking, there are to ways, first one is put more raw material in this plant, but this means you need more cost, not a clever choice. The second one is improve working efficiency of the plant, this means you need choose advanced equipment.

Before i introduce you our equipment, you should have a clear understanding of influencing factors to oil yield。

Three factors affect oil yield:

1, Raw material:

The oil yield of different raw material is not the same. When you choose raw material, you should pay much attention, wet materials contains more water, oil yield is lower. Because this is directly relate to oil yield and your own profit. Following is a form which shows you the oil yield of different raw material.

PE 50%-75%
PP 50%-75%
PS 50%-75%
ABS 40%
Leftovers of paper Wet 15-20%, dry 60%
House garbage 35-50%
Plastic cable 80%
Plastic bag 50%
Submarine cable 75%
Rubber cable 35%
Sole 30%
Big tires 45-50%
Small tires 35-40%
PVC Not available
PET Not available

2, Condenser:

Condenser is an very important part in this plant. Its function is cooling the oil gas, making oil gas into liquid, so that they can be collected. Better cooling efficiency, more liquid oil. If the condensing system isn’t good enough, lots of oil gas will cannot be liquefied, they will become exhaust gas, cause great waste, on the other hand, temperature of oil gas is very high, this is much more dangerous.

The condensing system of our plant:

We adopt three steps cooling system:

First step: cooling water and crude oil and pouring oil into the first heavy oil tank through oil-water separator.
Second step: cooling light oil and pouring it into the second measuring tank.
Third step: cooling the oil gas and exhaust gas (main composition of natural gas are methane, ethane, butane, hydrogen, etc ). Separating the gas above C4H, gas below C4H which can not be liquefied under normal pressure can be recycled to furnace thus energy saving and environmental friendly.
We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield. Our new designed plant adopt horizontal condenser, cooling efficiency is much better.

3, operation of the workers:

Workers operating mainly refers to the control of the temperature. If the temperature control is not well, a lot of oil gas will become tail gas (oil gas and tail gas is reciprocal relationships), high temperature exhaust gas would be much less oil and gas.
If you order our plant, this problem is no need to worry about, we will send the technicians to carry out the installation and debugging of equipment for the foreign users with compensation. Countries or regions with unstable political situation or in the throes of wartime are not included in our plan . Train the users to command the equipment and guide them for safe production. Explain the routine maintenance of equipment carefully and remove common faults. We are responsible for all the repairs that caused by our quality problems within one year’s warranty. Foreign accessories are generally delivered by DHL in order to provide service for foreign customers promptly. The foreign customers who have any questions on after-sales service can directly send email to our designated mailbox. We will answer your questions in 12 hours and solve various problems for the customers in time. For some counties whose visas are difficult obtain, customers can also send their technicians to our company to receive free guidance and training.
Dear customer, adopt high technology, and 20 years’ research and improvement, our plant is quality-assured, further more, our technicians provide guidance from installation, material selection to plant operation and all steps of the working process. We can give you our word, choosing huayin, bringing you more profit.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s