The most professional waste tire recycle machine

Xinxiang city huayin renewable energy equipment CO.,Ltd is a professional producer and supplier of waste tire recycle machine, our company was founded in 1993, we have rich experience in this project, the waste tire recycle machine from HUAYIN, is the most professional one in China.

Each set of waste tire recycle machine is composed by 13 parts:

Reactor, catalyst chamber, water-oil separator, two big horizontal Condensers(great cooling effect),two oil tank, anti-back fire device, negative pressure device,vacuum device, buffer tank, water jet flue, condenser pipe, de-dusting system, draft fan and chimney.

The key parts of the waste tire recycle machine are reactor and cooling systems:

Reactor directly decides the machine’s safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.
For cooling systems, there are two steps. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield.

Working process:

Firstly, put the raw material into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal. wood, gas or oil) in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the Catalytic Chamber to speed up the reaction and clean out the wax and other impurity. Then go to water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.
At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.

Product parameters:

Six sizes of waste tire recycle machine
(diameter*length) (mm)
Boiler plate Q245R/Q345R/S310
Thickness 16/18mm
Condensers Vertical condenser
Horizontal condenser
Product series 4th generation
5th generation
Slagging system Bucket elevator
Carbon black vacuum
Final product
(take tires for example)
oil 45-50%
Carbon black 25-30%
Steel wire 10-15%
gas 5%
Total weight 30-35T
Total power 19kw
Space needed 150m2
Labor needed 4 workers

Usage of the final products:

1, Oil usage: you could sell it to oil refining factory directly, use it for heating.
2, Carbon black usage: you can sell it directly, or make further process. There are two ways to process carbon black.
First, you could use a grinder machine, grind the carbon black into 800-1200mesh or more, then sell it into plastics factory, tube factory, rubber factory…
Second, you could use carbon black pellet machine, make the powder carbon black into carbon black pellet, then could use it for heating.
3, Steel wire usage: you can sell the steel wire directly. It can be valued about 2000RMB per ton in China.
HUAYIN company is the most professional supplier of waste tire recycle machine, our company also has a christian background, honest is our principle. Chose HUAYIN, you will never regret.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s