High oil yield waste oil distillation plant, turn waste oil into diesel and gasoline

People who have a car know that engine oil should be changed every once in a while. The waste engine oil will become useless, what should we do with this waste oil, if there is a green way for waste oil recycling? The answer is yes, i will introduce you a new way for waste oil recycling. The equipment we need is namedwaste oil distillation plant. With this plant, waste oil could be purified, the final products you get is diesel and gasoline.
Xinxiang huayin renewable energy equipment CO.,Ltd is a professional producer and supplier of waste oil distillation plant. We have done this project for 20 years, we can provide you the best quality equipment and also meet your personal requires.

Basic information of waste oil distillation plant:

Items Contents
Raw material Waste tire oil  waste engine oil  waste plastic oil
Structure form Horizontal
Operating pressure Constant pressure
Heating material Coal, charcoal, fuel gas, fuel oil
Average out-put oil rate 90%
Material of reactor Q245R&Q345R boiler plate
Thickness of reactor 16mm
Mode of cooling Water cooling
Power in total 21kw
Life 5-6 years

Working process of waste oil distillation plant:

First, pump the waste oil into reactor by oil pump.
Second, use coal/wood/natural gas/fuel oil/electricity heating the reactor.
Third, after heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or u can also call it fuel oil. If you wanna get diesel and gasoline separately, through temperature control could separate it and collected into two different oil tanks.
Fourth, some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
Fifth, when use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design some high pressure nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.
Sixth, the exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.

Final products:

Waste oil distillation plant
Raw material Waste engine oil, waste lubrication oil, tire crude oil, plastic crude oil
Fuel oil 90%
Slag and tail gas 10%

Oil yield:

Raw material Oil yield
Waste engine oil 85%-90%
Waste plastic oil 90%
Waste tire oil 85%-90%

Advantages of our waste oil distillation plant:

Safety:

safety is the most important factor in the whole process. We had successfully researched some safety devices which ensure the machine can work safely. Such as, the safety valves ,alarming device and the pressure gauge etc. If the inside of the reactor produce some pressure, the alarming device will ring automatically, even no response from worker, safety valves will decompress the pressure automatically. The device guarantee no accidents.  Workers shall operate normally and check pressure gauges, alarm and safety valve pipe flow regularly. To ensure safety in production, the shift worker are not free to their posts. We also have oil-water separator which can stop the oil gas recycle to the reactor, which could avoid the accident.

Environmental protection:

environmental protection include four parts,water, slag,gas,sound.

Energy saving:

recycling of exhaust gas and scientific fire channel design can save energy and thereby reducing costs.

Long life:

hot-blast stove is long life,but not energy saving,its consumption of energy is much greater than repair costs of furnace.Direct fired reactor is energy-saving but short life.It is contradiction.We resolved this conflict by thickening steel plate reactor of fire approach part which is oxidized extremely,so we generally use the 14mm,16mm,18mm thickness of steel plate,or 12mm,14mm thickness plate, not only energy saving, but also long life.

High degree of automation:

feed the waste oil, crude oil automatically  ,to pump oil automatically.
Guarantee with after service: we have Christian background, love is the heart of our culture .Selling devices not for selling only, but to help you approach to success. Quality and service is our commitment and responsibility. Your success is our aim.We have a good reputation in the industry.

Low cost:

all costs are low because of being located at the suburbs. Advanced and complete processing equipments,almost no external processing and customer interests oriented business philosophy ,It stands to reason that the price is low.
HUAYIN waste oil distillation plant is hot selling all over the world, we won a good reputation from our customers, welcome your inquiry and visiting, we are looking forward to have a good cooperation with you.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s