Waste plastic to oil machine

Waste plastic to oil machine is used to recycle waste tires/plastics to fuel oil.
Compared with landfill and burning, waste plastic to oil machine is a green technology and a better way for waste management.
The raw materials can be used tires, waste plastic, scrap rubber which can be easily found from rubbish collecting station.
The cost of raw materials is low, even you can get subsidy by solving pollution caused by garbage in many countries. Mean-while the fuel oil has a good market in industry field.
Waste plastic to oil machine


HY-5T 2200*6000 5 TON
HY-6T 2200*6600 6 TON
HY-7T 2600*6000 7 TON
HY-8T 2600*6600 8 TON
HY-9T 2800*6000 9 TON
HY-10T 2800*6600 10 TON


Material of reactor Q345R boiler plate
Thickness of plate 16/18mm
Manufacturing method Auto cutting, auto rolling, auto welding
Total weight 25-35 ton
Operating power 22kw
Space needed
(only for 1 set of machine)
Worker needed 4
Condensing mode 3-step condenser
Feeding mode Auto feeding
Discharging mode Auto discharging
Input Used tire, scrap plastic, waste rubber
Output Fuel oil, carbon black, (steel wire)


Waste plastic to oil machine working flow chart:

Waste plastic to oil machine

Usage of final products:

NO. End products Productivity      Usage
1 Pyrolysis oil 45% A. Sell directly.
B. Turn to diesel and gasoline by oil distillation machine.
C. Fuel materials.
2 Carbon black 30% A. Sell directly.
B. Reprocessing to fine carbon by carbon black refining machine.
C. Making into pellets by carbon black pellet machine.
3 Steel wire 15% A. Sell directly.
B. Deep processing to steel bloom by hydraulic press-packing.
4 Flammable oil gas 10% A. Fuel burn by use gas burn system(pyrolysis machine included)
B. Flammable gas can be storage as fuel material for heating.


Profit analysis:

(here we take 10 ton waste plastic to oil machine as example)


Raw material cost: ___ USD / TON×10Ton= ___USD
Fuel material cost: ___  USD / KG× ___KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h  ___USD/KW×20hours= ___ USD
Worker’s salary: ___USD/Day×4Persons= ___USD


Oil Profit: ___USD/Ton×4.5Ton= ___ USD
Carbon black: ___ USD/Ton×3Ton=  ___USD
Steel wire: ___ USD/Ton×1.5Ton= ___ USD

Gross Profit:

Total profit  ___ USD - Total cost  ___ USD= ___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Features of our waste to oil machine:

Safety :

We treat safety as the first important thing in production.
1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or negative pressure.
3) Temperature monitoring device to avoid excessive working temperature.
4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid catching fire.

B. Environmental protection:

1) The flue gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.
2) The procedure to remove carbon black is working under closed situation to avoid pollution.

C. High oil yield:

1. We have 3 steps for cooling system: one condenser pipe, two large horizontal condensers and two vertical condensers. The oil gas pass through 3 steps cooling system in sequence. The total cooling area is 65 square meter.
2. When the oil gas pass through the condensers, it’s divided into several portions by small pipes inside condenser and be cooled separately.
3. In this way we maximize the cooling effect and improve the oil yield.

D. High oil quality:

The oil gas is purified by molecular sieve inside catalyst chamber so that the quality of oil is higher.

E. Energy saving:

1) The flame path is designed as spiral so that the quantity of heat can be fully used.
2) The residual gas from pyrolysis is recycled to furnace burning to heating the reactor.
3) The insulation cover is formed by 3 levels: steel plate, rock wool and refractory cement. Excellent thermal insulation effect helps saving fuel.

F. High degree of automation:

1) In manufacturing we use auto cutting machine, auto welding machine, auto rolling machine so that both quality and appearance of our products can be guaranteed.
2) In production, we use auto-feeder to feed raw materials into auto-feeder. By auto-feeder it needs few workers and less time to feed. And because of 50 ton hydraulic pressure from auto-feeder, it can feed more tires than labor.

G. Long service life:

1) The material of reactor is Q345R boiler plate with 16/18mm thickness which is produced by Chinese well-known enterprise. The head of reactor and accessories are using one-piece molding shell cover rather than welded plate.
2) All cutting, rolling and welding works are finished by automatic machines.
3) We know quite well about the material quality and manufacturing process, that’s why we are confident in the service life of our products.
4) We also supply installation service, training service and one year warranty.
Waste plastic to oil machine


Waste plastic to oil machine

HUAYIN customers:

Waste plastic to oil machine
CNC machinery:

Waste plastic to oil machine

Xinxiang huayin renewable energy equipment CO., Ltd is a professional manufacturer and supplier of waste plastic to oil machine, we have 20 years experience in this filed, we are the leading industry in China. We provide the best quality equipment and services to our customers, and we also manufacture equipment according to your requirements. If you are interested in this project, please contact us. Welcome your inquiry and visiting.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s