Used oil recycling equipment, turn waste oil into diesel

  Xinxiang huayin renewable energy equipment CO.,Ltd is the professional manufacturer of waste tire/plastic pyrolysis plant,and used oil recycling equipment, our equipment passed the ISO9001&ISO14001&CE&Patents. After 20 years’ research and improvement, products manufactured by our company up to a new standard, for example, our new designed used oil recycling equipment is 100% pollution-free during the whole processing. Further more, every single part of our used oil recycling equipment is well-designed and made by high quality material, we can ensure you the performance and quality of our equipment.
Used oil recycling equipment, turn waste oil into diesel

Available raw materials:

Used engine oil, tire crude oil, plastic crude oil, heavy oil, etc.

Final products:

Fuel oil 90%
Slag and tail gas 10%

 

Working process of used oil recycling equipment:

First, pump the waste oil into reactor by oil pump.
Second, use coal/wood/natural gas/fuel oil/electricity heating the reactor.
Third, after heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or u can also call it fuel oil. If you wanna get diesel and gasoline separately, through temperature control could separate it and collected into two different oil tanks.
Fourth, some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
Fifth, when use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design some high pressure nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.
Sixth, the exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.
Used oil recycling equipment, turn waste oil into diesel

Advantages of our used oil recycling equipment:

Safety:

1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Professional heating treatment and x-ray detection chamber are especially for welding.
3. Vacuum system will prevent oil gas from  going back to reactor and causing accident.
4. Professional thermometer, pressure gauge and safety valve.
5.It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and safe gas gun. Before burning, we should ensure the safety of production.

Environment friendly:

1.Well water dedusting system can avoid black smoke.
2.The waste gas will be recycled for heating reactor, no gas pollution
3.Every junction of the reactor is in good sealing situation with professional sealing material.

Long service life:

1.Material: Q345R special steel plate ,thickness 16mm.
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.

Profit analysis:

(here we take 5 ton used oil recycling equipment as example)

Cost:

Raw material cost:  ___ USD / TON×5Ton=  ___ USD
Fuel material cost:  ___  USD / KG× ___ KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h  ___ USD/KW×20hours= ___ USD
Worker’s salary: ___ USD/Day×4Persons= ___ USD

Profit:

Oil Profit: ___ USD/Ton×4.5Ton=  ___ USD

Gross Profit:

Total profit ___  USD - Total cost  ___ USD=  ___ USD
Note: This project not only a business but also a green technology to clean the world.

More details about used oil recycling equipment:

Used oil recycling equipment, turn waste oil into diesel

Used oil recycling equipment, turn waste oil into diesel

 

Used oil recycling equipment, turn waste oil into diesel

Certificates:

Used oil recycling equipment, turn waste oil into diesel

HUAYIN customers:

Used oil recycling equipment, turn waste oil into diesel
CNC machinery:

Used oil recycling equipment, turn waste oil into diesel

Used oil recycling equipment is a green technology and a good way for used oil management, the fuel oil you get from this equipment has a very good market, it will bring you great profit. If you are interested in this project, please contact us.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s