Used oil recycling equipment is the second link of our waste to energy equipment, the first link is waste tire/plastic pyrolysis plant, the third link is color and smell remove system. The function of used oil recycling equipment is extracting diesel and gasoline from tire/plastic oil and waste engine oil with the method of distillation, here, i would like especially introduce you the used oil recycling equipment.
Working process of used oil recycling equipment:
First, pump the waste oil into reactor by oil pump.
Second, use coal/wood/natural gas/fuel oil/electricity heating the reactor.
Third, after heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or u can also call it fuel oil. If you wanna get diesel and gasoline separately, through temperature control could separate it and collected into two different oil tanks.
Fourth, some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
Fifth, when use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design some high pressure nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.
Sixth, the exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.
Specification of used oil recycling equipment:
|Slag and tail gas||10%|
(here we take 5ton used oil recycling equipment as example)
Raw material cost: ___ USD / TON×5Ton= ___ USD
Fuel material cost: ___ USD / KG× ___ KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___ USD/KW×20hours= ___ USD
Worker’s salary: ___ USD/Day×4Persons= ___ USD
Oil Profit:___ USD/Ton×4.5Ton= ___ USD
Total profit ___ USD － Total cost ___ USD= ___ USD
Note: This project not only a business but also a green technology to clean the world.
Advantages of used oil recycling equipment:
1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Professional heating treatment and x-ray detection chamber are especially for welding.
3. Vacuum system will prevent oil gas from going back to reactor and causing accident.
4. Professional thermometer, pressure gauge and safety valve.
5.It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and safe gas gun. Before burning, we should ensure the safety of production.
1.Well water dedusting system can avoid black smoke.
2.The waste gas will be recycled for heating reactor, no gas pollution
3.Every junction of the reactor is in good sealing situation with professional sealing material.
Long service life:
1.Material: Q345R special steel plate ,thickness 16mm.
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
Need more information about used oil recycling equipment, please contact us or visit our website: http://www.huayinenergy.com.