Professional waste tyre pyrolysis plant

  Xinxiang huayin renewable energy equipment CO.,Ltd is a professional manufacturer  and supplier of waste tyre pyrolysis plant, we have 20 years experience in this project, and a research group with more than 30 technicians, we are the leading industry in China.
Professional waste tyre pyrolysis plant

Details about waste tyre pyrolysis plant:

High security level waste tyre pyrolysis plant

High security level waste tyre pyrolysis plant

Professional waste tyre pyrolysis plant

Waste tyre pyrolysis plant working process:

Firstly, the raw material is put into furnace,then seal the feed inlet system.
Secondly, burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system. The reactor will slowly heat ,when the temperature reach around 250 degree Celsius,it will produce oil gas, oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil. The gas which can not be liquid under normal pressure ,which will be designed to back to combustion system to instead the fuel material to burn the reactor .which can save energy very much. After finished oil produce ,the temperature of reactor will be down ,in same time ,carbon black will be discharged automatically.
Lastly, when the temperature fall to 100 degree Celsius,worker could opened the door of reactor to discharge of steel wire, then can start to another batch working.
Professional waste tyre pyrolysis plant


1. No need shred tires, with auto feeder, could feeding whole tire directly.
2. Double catalyst chamber, and also add molecular sieve, it can absorb impurities, in  this way avoid congestion and improve oil quality. Besides, two catalyst chambers  could reach double effect of catalytic,decrease pressure and remove the dust from the oil gas.
4. Two horizontal condensers instead of 5 vertical condenser, and also the volume of  one horizontal condenser can be equaled with 3 vertical condensers. Besides, the length has twice, so cooling effect will be better, in this way oil output can be     guaranteed and raised.
5. Another two length cooling pipes, the cooling area can be equaled with one vertical  condenser, in this way, the cooling result will be better than our forth generation.
6. Double anti-back fire device and two long cooling pipes. Double anti-back fire device will be more safety,and also make full recycling tail gas.
The two long pipes can be equaled with one vertical condenser, it will cooling down the tail gas again, guarantee oil output.
7.The exhaust gas, it is white, no pollution, even if you put a white towel on it, you can not see any black. It can meet the emission standard of International required.

Final products and usage:

1, Fuel Oil(40% to 45%): Can be used as industrial fuel for burning.
2, Crude Carbon Black(30% to 35%): Can be sold to the brick factory as internal combustion or to the factory needing it as raw materials, such as tire, shoe, cable and sealant companies. Or you can make it into pellet with our device, then sell to the factory to make pipes or other products.
3, If you use waste tire as raw material, you can also get steel Wire(15% to 20%): Can be sold to the iron and steel company directly.
4, Gas(5%): Can return to the hearth to burn as fuel, so that you can save cost to buy wood or coal.

Profit analysis:

(here we take 10 ton waste tyre pyrolysis plant as example)


Raw material cost:___ USD / TON×10Ton= ___ USD
Fuel material cost: ___ USD / KG×___ KG=  ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___ USD/KW×20hours=___USD
Worker’s salary: ___ USD/Day×4Persons= ___USD


Oil Profit:___ USD/Ton×4.5Ton=___ USD
Carbon black: ___ USD/Ton×3Ton= ___ USD
Steel wire:___ USD/Ton×1.5Ton= ___ USD

Gross Profit:

Total profit ___ USD - Total cost  ___ USD= ___  USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Professional waste tyre pyrolysis plant


Professional waste tyre pyrolysis plant

HUAYIN customers:

Professional waste tyre pyrolysis plant

CNC machinery:

Professional waste tyre pyrolysis plant

Need more information about our waste tyre pyrolysis plant, please contact us or send us your email. We are looking forward to have a good cooperation with you.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s