Waste tyre pyrolysis plant with latest technology

Xinxiang Huayin Renewable Energy Equipment Co.,Ltd is specialized in manufacturing waste tyre pyrolysis plant for 20 years. After years’ research, experiment and improvement, we have the honor to introduce you the waste tyre pyrolysis plant with latest technology. This is a green technology to recycle waste tyre/plastic to oil instead of burning or burying.

Waste tyre pyrolysis plant with latest technology

Six models for your choice:

Waste tyre pyrolysis plant with latest technology

More details about waste tyre pyrolysis 


Waste tyre pyrolysis plant working process:

1, Prepare raw material( waste tire, plastic, rubber), put them into reactor automatically, then close the feeding door tightly.
2, Burn the fuel materials( like coal, wood, natural gas,oil etc ) in the furnace of the waste tire pyrolysis plant . The reactor will be heated slowly. when the temperature reaches nearly 180℃, the oil gas will come out and then go to the cooling system and liquefying to oil.Some incondensable gas which can’t cooling down will flow to furnace through a pipe which can be used to heat the reactor. (In this way, you can save much more energy as you use energy for heating.) After pyrolysis, all the oil gas will come out from reactor, the temperature will falling down. Then make the rotate anticlockwise, carbon black discharging begins.
3, when the temperature falls to 50℃, worker can open the door of the reactor and take steel wire out. You can start another round work.

Waste tyre pyrolysis plant with latest technology

Output information:

Waste tyre pyrolysis plant with latest technology

Waste tyre pyrolysis plant with latest technology


Profit analysis:

(here we take 10 ton waste tyre pyrolysis plant as example)


Raw material cost: ___USD / TON×10Ton=___USD
Fuel material cost: ___ USD / KG×___ KG=___USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h___USD/KW×20hours= ___USD
Worker’s salary:___ USD/Day×4Persons= ___USD


Oil Profit:___ USD/Ton×4.5Ton=___ USD
Carbon black: ___ USD/Ton×3Ton=___ USD
Steel wire:___ USD/Ton×1.5Ton=___ USD

Gross Profit:

Total profit ___ USD - Total cost ___ USD=___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Advantages for safety:

When feeding, we need to rotate the boiler taking advantage of built-in spiral plates to full up the reactor and make full use of the space. In this case, the oil outlet pipe maybe blocked.

1).anti-clogging net

In order to avoid this problem, We set one anti-clogging net inside it.

2). Pressure gauges, alarms, and safety valves

2.1) Even there is blocking causing high pressure inside the reactor (this situation easily cause explosion), alarm will ring to call worker to adjust the condition.
2.2) If there is no answer from workers, no need to worry, we also have pressure reducing valve which can automatically reduce the pressure .
Every case we have taken into attention to avoid any dangerous condition. Just keep danger strangled in the cradle.

3). Vacuum Device

Especially continuous feeding of waste plastic and also heating, there maybe odorous gas going out from the reactor. How to avoid? Vacuum Device helps! Before heating the reactor and the temperature inside below 100 Celsius degrees, open this device, vacuum state easily sunk these bad smell to its space.Convenient and easily operated.

4). Anti-back fire device

This is a safety device, recycling residual goes to furnace as fuel, water sealing design prevent tempering, more secure.

Advantages for environmental protection:

1, Water includes two parts:

First, condensing water, it can be recycled,water release is that pour into, no pollution, only a little high temperature.
Second, dust removing water, it must be polluted water, but it also can be recycling, just pour into no discharge.
2, Slag is by-product, if it is made by plastic oil refining, it can be made of coal and brick. If it is made by tires oil refining, it is called carbon black, it is valued about 400-500 Yuan per ton in our country, if make it further process to 800-1200 mesh, it can be value about 4000-5000 Yuan per ton, this kind of slag is mainly used in rubber and plastic factory.
3, Gas includes two parts: First, exhaust, our equipments have advanced exhaust gas recovery system; we can recycling and reuse it.
Second, smoke dust, it is generated from burning coal or exhaust, after the treatment of dust removing device, can meet the emission standards of national requirements.
4, Noise: Noise emissions are below the national standard.


Waste tyre pyrolysis plant with latest technology

HUAYIN customers:
Waste tyre pyrolysis plant with latest technology

CNC machinery:

Waste tyre pyrolysis plant with latest technology

With 20 years experience, we can ensure you the quality of our waste tyre pyrolysis plant, and the quality of the oil. Choose Huayin, make a better tomorrow for you and for me.
Email: huayin@oil-pyrolysis.com

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s