Best quality waste tyre pyrolysis plant with high oil yield

Waste tyre pyrolysis plant is a green technology and a good way for waste management. You can use waste tyre, plastic and used rubber as raw material, after process, you will get fuel oil and carbon black from this plant, if you use waste tyre, you can also get seel wire. The fuel oil has a very good market, it can bring you great profit.
Attention:you cannot put waste tyre and plastic into the waste tyre pyrolysis plant at the same time.

Best quality waste tyre pyrolysis plant with high oil yield

Parameters:

Best quality waste tyre pyrolysis plant with high oil yield

Best quality waste tyre pyrolysis plant with high oil yield

Best quality waste tyre pyrolysis plant with high oil yield

Waste tyre pyrolysis plant working process:

Firstly, put the raw material into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal. wood, gas or oil) in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the Catalytic Chamber to speed up the reaction and clean out the wax and other impurity. Then go to water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.
At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.
Best quality waste tyre pyrolysis plant with high oil yield

Final products and usage:

Best quality waste tyre pyrolysis plant with high oil yield

Best quality waste tyre pyrolysis plant with high oil yield

 

Best quality waste tyre pyrolysis plant with high oil yield

Profit analysis:

(here we take 10 ton waste tyre pyrolysis plant as example)

Cost:

Raw material cost:___USD / TON×10Ton=___USD
Fuel material cost:___ USD / KG×___KG=___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___ USD/KW×20hours=___USD
Worker’s salary:___USD/Day×4Persons=___USD

Profit:

Oil Profit:___USD/Ton×4.5Ton=___USD
Carbon black:___USD/Ton×3Ton=___USD
Steel wire:___USD/Ton×1.5Ton=___USD

Gross Profit:

Total profit___USD - Total cost ___USD= ___USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Advantages of our waste tyre pyrolysis plant:

1, Security:

This is a special field(high profit and high risk), technology is very important, we had been doing waste tryes/plastics pyrolysis plant about 20 years(including about 10 years of oil refining experiences), actually, have been experienced times of failure, through these past experience, the technology of our company have been maturity
All the equipments have pressure gauges, alarms, safety valves, and also a specialist anti-blocking device

2, Environmental protection:

Water includes two parts:
First, condensing water, it can be recycled,water release is that pour into, no pollution, only a little high temperature.
Second, dust removing water, it must be polluted water, but it also can be recycling, just pour into no discharge.
Slag is by-product, if it is made by plastic oil refining, it can be made of coal and brick. If it is made by tires oil refining, it is called carbon black, it is valued about 400-500 Yuan per ton in our country, if make it further process to 800-1200 mesh, it can be value about 4000-5000 Yuan per ton, this kind of slag is mainly used in rubber and plastic factory.
Gas includes two parts: First, exhaust, our equipments have advanced exhaust gas recovery system; we can recycling and reuse it.
Second, smoke dust, it is generated from burning coal or exhaust, after the treatment of dust removing device, can meet the emission standards of national requirements.
Noise: Noise emissions are below the national standard.

3, After sales service:

We are the only company in this field that who has Christian background, love is the heart of our culture.
All the accessories have been ready for you, include the part, brick. When these equipments delivery to your country, it can be producing directly, this will save a huge time for you.

Certificates:

Best quality waste tyre pyrolysis plant with high oil yield

HUAYIN customers:

Best quality waste tyre pyrolysis plant with high oil yield
CNC machinery:

Best quality waste tyre pyrolysis plant with high oil yield

Xinxiang huayin renewable energy equipment CO., Ltd is a professional manufacturer and supplier of waste tyre pyrolysis plant, we can manufacture equipment as your requirements. We have 20 years experience in this field, our products are quality assurance, and we will also provide you excellent after sale services. If you are interested our waste tyre pyrolysis plant, please contact us. Welcome your inquiry and visiting.

SEE MORE AT: http://www.oil-pyrolysis.com
EMAIL: huayin@oil-pyrolysis.com
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s