21 years experience pyrolysis plant manufacturer:
With society always developing, oil resources underground is becoming less and less as human exploiting and environment degradation. On the other hand, the amount of municipal solid wastes are becoming more and more. In order to change this situation, huayin research in renewable energy field since 1993. With 21 years research and development, we invent the green technology that can turn the normal daily wastes like tyres and plastics into oil energy, which can be used as fuel in many industrial fields. Huayin is specialized in manufacturing waste tyre plastic to fuel oil pyrolysis plant, waste tire/plastic oil distillation machine and used engine oil refining machine, decoloring and bad smelling removing machine, you can get diesel and gasoline as final products.
Security: The most important concern of plastic pyrolysis plant:
There are many manufacturer in pyrolysis machine market, the quality also varies, if you buy the waste plastic pyrolysis plant with low quality, you may experience the disastrous accident that is explosion.
There following three factors are reasons that cause pyrolysis plants explosion:
1. The reactor will create methane, ethane, propane, butane and so on from the tires/plastic during heating. These gases should be prevented from re-entering the reactor.
When these 3 factors combine, it will cause an explosion.
While, with huayin pyrolysis machine safety equipment, you will never worry about personal security:
1) Our Reactors are manufactured to the exacting standards of pressure vessels. The materials of the 5th generation reactor are Q245R or Q345R boiler steel, these two materials exhibit high temperature and heat resistance.
2) Our Plants have an oil-water separator and an anti-blowback device which contains water in it; it will stop the oil gas from blowing back to the reactor. Because the oil gas passes through water and comes out as bubbles, it’s impossible for blow back to occur this eliminates the first factor.
3) Our machine can discharge carbon black and slagging automatically. There is a Slag discharge pool alongside the reactor, and the cover has water all around the edge. This pool connects with the furnace, so the oxygen inside it will be consumed and thus create a vacuum. As no oxygen can re-enter because of the water pool the second factor is also eliminated.
4) When factors 1 and 2 are eliminated, the possibility of explosion is negated.
Large and small capacity plastic pyrolysis plant:
1. Working with auto-feeder, it is able to contain 12 tons crushed tires or 10 tons whole tires.
2. For plastic, it can contain even 12 tons.
3. The diameter of feeding port is 1400mm.
4. After 2 hours’feeding, it’s time to heat the reactor by coal/wood/natural gas. Usually when the temperature is 155 Celsius degrees around, the oil gas will generated.
1. It can load 10 tons of waste tires,12 tons for waste plastic.
2. The thickness of Q345R is 16 mm, which can last 500-550 batches.
3. We can also make reactor by material 310S+Q345R,which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.
1. This mode of machine can load 10 tons of crushed tires or 12 tons of plastic.
2. After finishing one batch, with auto-feeder, you don’t need to wait for the plastic pyrolysis plant cooling down since workers will have to go inside to feed material. If you don’t have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste tires/ plastic go ahead.
Looking forward for your visiting:
Huayin company is specialized in manufacturing waste tyre pyrolysis machine, waste plastic pyrolysis plant, waste oil distillation equipment and decoloring device. Huayin has been in this field since 1993. We have a special factory with 2000 square meters for laboratory and running plant, 30 professional technicians to help you solve problems. Welcome your inquiry and visiting!