Hot sale 5th generation waste tyre pyrolysis machines

Why choose tyre/plastic pyrolysis machines for wastes recycling?

Huayin 5th generation waste tyre plastic pyrolysis machine was inveted in 2008 by huayin boss Mr.Guo, till 2014 today, the pyrolysis machine technology is mature enough to meet clients needs in many countries. In many countris include China, people used to dispose waste tires and plastic with landfill or burning. In fact, it not only causes serious pollution to environment and could probably lead to fire disaster or disease spread, but also a huge energy wastes. By contrast, pyrolysis machines is a green way for waste management.
The recyclable materials can be used tires, waste plastic, scrap rubber which can be easily found from rubbish collecting station. The cost of raw materials is quite low or free, even you can get government subsidy by solving pollution caused by garbage in many countries. Meanwhile, the fuel oil generated from tyre plastic pyrolysis machines find good market in many industry fields.
Large amounts of waste tyre and plastic can be seen everywhere

100% recycling pyrolsis machine:

Huayin tyre pyrolysis machine is 100% recycling equipment, all the final products have values. The tire oil can be sold to many industries to be used as heating material, it can also be used for power generating. The carbon black can be deep processed into briquet or carbon black pellet which has high market value. The steel wire separated from old tires could be sold directly. The combustible gas generated during pyrolysis process will be collected and flow back to the hearth to heat the furnace.

FAQ from customers:

 

Why choose Huayin waste tyre plastic pyrolysis machines:

A) Security
We treat personal security as the first important aspect in pyrolysis machine working process.
1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or negative pressure.
3) Temperature monitoring device to avoid excessive working temperature.
4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid catching fire.
b) Environmental friendly
1) The tail gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.
2) The procedure to remove carbon black is working under closed situation to avoid pollution.
c) High oil yield
1. We have 3 steps for cooling system: one condenser pipe, two large horizontal condensers and two vertical condensers. The oil gas pass through 3 steps cooling system in sequence. The total cooling area is 65 square meter.
2. When the oil gas pass through the condensers, it’s divided into several portions by small pipes inside condenser and be cooled separately.
3. In this way we maximize the cooling effect and improve the oil yield.
D) High oil quality
The oil gas is purified by molecular sieve inside catalyst chamber so that the quality of oil is higher.
E) Energy saving
1) The flame path is designed as spiral so that the quantity of heat can be fully used.
2) The residual gas from pyrolysis is recycled to furnace burning to heating the reactor.
3) The insulation cover is formed by 3 levels: steel plate, rock wool and refractory cement. Excellent thermal insulation effect helps saving fuel.
F) High degree of automation
1) In manufacturing waste tyre plastic pyrolysis machines, we use auto cutting machine, auto welding machine, auto rolling machine so that both quality and appearance of our products can be guaranteed.
2)  In production, we use auto-feeder to feed raw materials into auto-feeder. By auto-feeder it needs few workers and less time to feed. And because of 50 ton hydraulic pressure from auto-feeder, it can feed more tires than labor.
G) Long service life
1) The material of reactor is Q345R boiler plate with 16/18mm thickness which is produced by Chinese well-known enterprise. The head of reactor and accessories are using one-piece molding shell cover rather than welded plate.
2) All cutting, rolling and welding works are finished by automatic machines.
3) We know quite well about the material quality and manufacturing process, that’s why we are confident in the service life of our products.
4) We also supply installation service, training service and one year products warranty.

Pyrolysis machine automatic manufacturing process

Huayin pyrolysis machine in foreign countries

Welcome your serious inquiry anytime!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s