Waste tyre pyrolysis plant basic information:
Huain company began to manufacture waste tyre pyrolysis plant since 1993, we have 3ton, 5ton, 8ton, 10ton large and small capacity equipment to satisfy different customer requirements. Every investor want to find the right technology, unluckily, there are many unqualified waste tyre pyrolysis plant in the market that make clients suffer great losses. While, if today you see this page, you know our machine and technology, I have to say congratulations that you find the right one. After you come to visit our factory, you will believe your right choice.
Raw material: used whole tyres, shred tyres
Final products: 45%-50% crude oil, 30% carbon black, 15% steel wire
Heating material: coal/wood/fuel oil/natural gas
Machine cover area: usually 400 square meters, 40meters length, 10meters width.
Reactor material: Q345R Boiler plate
Waste tyre pyrolysis plant working process and working time:
1. Use auto-feeder load the whole waste tires into reactor, seal the reactor and heat the reactor by burning the fuel (coal, wood, natural gas, oil) in the combustion system.
2. There is a thermocouple installed the oil gas outlet to test the oil gas temperature, when thermocouple show 120 Celsius degree, the oil gas will come out, then go through the cooling system become oil.
3. At same time, there are some gas (CH4, C2H6, C3H8, C4H10 and H2) cannot be cooled under normal pressure; they will be recycled back to combustion system to burn as energy.
4. The dust and sulfur gas will be removed by the dust removing system.
5. After the oil gas run out, there are slag (carbon black) inside of the reactor, HUYAYIN waste tyre pyrolysis plant use the automatic discharging system to remove it.
6. Last step.With auto-feeder to remove the tire wire steel.
Usually 10 tons capacity needs about 21 hours to finish the whole process.
2 hours for loading 10 tons waste tires.
4 hours for preheating the reactor.
12 hours for the tire become gas and cooling become oil.
1 hour for cooling the reactor.
1 hour for discharging the carbon black.
1 hours for removing the tires steel.
Profit analysis for your reference:
|Salary for workers||5 Persons||5USD/Person||25|
|Gross profit||3345-2345=1000USD(per batch)|
|It means that 2-3months, you can get machine cost back.|
Note: 1. Oil yield rate depends on raw material, usuallly, truck tyres 45%-50%, car tyres 40%-45%, motorcycle and bicycle tyres 30%, Average oil yield will be 45%.
2. The above price is getted from our India clients, any questions contact with me.
Waste tyre pyrolysis plant installation and training:
1. Installation and Training: Our Company will send one technician for each set of machine for guiding you installation, debug the machine and training your workers. The installation period shall be around 40 days. You should pay for round-trip tickets, food and accommodation for our technician, and also at least 50USD/Day salary.
2. Warranty: The warranty period is 1 year, excluding spare parts. The problem caused by wrong operation of workers shall not be responsible by our company.