Used tires to oil machine

With Industrial progress, the emergence of new manufacturing facilities will inevitably lead to an increase of industrial and household wastes. A significant part of the MSW consists of rubber waste and plastic wastes: gaskets, hoses, conveyor belts, rubber rugs, protective clothing, etc. But the major environmental challenge is used tires. Every year, there are more than 1 million tons of used tires produced in China. In Europe countries, this figure rises to 2.5 million tons, in the United States—even up to 3 million tons. Find new green way to recycle so many used tires is of great environmental and economic significance for all countries around the world.

Here comes the Huayin used tires to oil machine, it adopts the 100% recycling pyrolysis technology. The pyrolysis technology is characterized by high temperatures, conversion rates and continuum of processes ranging from thermal decomposition of rubber without addition of any reactive gases, such as air or oxygen. The used tires to oil machine pyrolysis process transforms scrap tires into a valuable fuel products and creates renewable energy sources. Used tires to oil machine technologies handle used tires through a process of thermal treatment to convert them into a fuel product: combustible gas, crude oil and steel wire, carbon black. The resultant pyrolysis gases can be used for energy production, fuels or chemical production, which significantly reduces the power consumption for processing – energy is only required during startup and emergency situations.

Used tires to oil Pyrolysis is process of molecular breakdown where larger molecules are broken down into smaller molecules. Used tires to oil machine is an industry designed to carry out pyrolysis of waste plastic & tyre. In the case of plastic/tire pyrolysis, long chain polymer is broken down into smaller chains of Hydrocarbon Gas and Pyrolysis Oil. Heat and catalyst are required for the reaction. The working process is outlined as the following:
1. Feed the whole waste tires or scrap tires into reactor, seal the reactor tightly.
2. Heat the reactor by burning the fuel (coal, wood, natural gas, oil) in the combustion system. The temperature in within the reactor is controlled and smoothly increased;
3. There is a thermocouple installed the oil gas outlet to test the oil gas temperature, when thermocouple show 120 Celsius degree, the oil gas will come out, then go through the cooling system become oil.
4. At same time, there are some gas (CH4, C2H6, C3H8, C4H10 and H2) which can not be cooled under normal pressure; they will be recycled back to combustion system to burn as energy.

The main equipment is: Reactor, catalyst chamber, water-oil separator, two big horizontal Condensers (great cooling effect), two oil tank, anti-back fire device, negative pressure device, vacuum device, buffer tank, water jet flue, condenser pipe, de-dusting system, draft fan and chimney.
Used tires to oil machine pyrolysis technology is one of the most environmental friendly, cost-effective options for treating a wide variety of rubber products and plastics. Our machine have been installed in maany developing and developed countries India, Pakistan, Thailand, Malaysia, Philippines, Korea, China, Kazakhstan, Vietnam, Italy, Romania, Hungary, Lebanon, Russia, Turkey, Slovakia, Kuwait, Iraq, Iran, Spain, Jordan, Poland, Czech, Ecuador and Guatemala, Haiti, Mexico, Peru, Brazil, Argentina, Nigeria, Bulgaria, Ethiopia and South Africa.

-Wanna Calculate Your Profits? Click Here

Advertisements

The latest hot sale waste tire pyrolysis plant

Latest hot sale waste tire pyrolysis plant:

Waste tire pyrolysis plant is very popular in recent days, it can create wealth and solve environmental pollution. In most countries people handle waste tires and plastic with landfill or burning. But it causes serious pollution to environment and could probably lead to fire disaster or disease spread. By contrast, pyrolysis plant is a green way for waste management. The raw materials can be used tires, waste plastic, scrap rubber which can be easily found from rubbish collecting station. The cost of raw materials is low, even you can get subsidy by solving pollution caused by garbage in many countries. Meanwhile the fuel oil finds a good market in many industry fields.

The latest hot sale waste tire pyrolysis plant

The latest hot sale waste tire pyrolysis plant

End products from waste tire pyrolysis plant:

1. Crude oil (45%-50%): Oil from this machine can be used as industrial fuel for burning.
2. Carbon black (30%): First, Carbon black from this machine is crude. You can sell it to the brick factory as internal combustion or to the factory which need it as raw materials, such as shoe, tire, cable and sealant companies. Second, could make further process, make carbon black powder into carbon black briquette, and use it for burning.
3. Steel wire (30%): It can be sold to the iron and steel company directly.
4. Waste gas (5%): we have a special design could recycling it into fire furnace for burning.

see more at: http://www.huayinenergy.com/Product/Tire_pyrolysis_plants_equipment_in_Peru_for_renewable_energy_machine_with_high_profits_461.html

Funciona Automáticamente 10T Equipo De Pirólisis De Neumáticos Gastados

¿Por qué cada vez más personas están dispuestas a invertir este nuevo proyecto?

Sabemos que los neumáticos gastados,los plásticos desusados,los cauchos abandonados,los aceites usados etc,están aumentando cada día más.

Funciona automáticamente 10T equipo de pirólisis de neumáticos gastados

¿Cómo lidiar con estos problemas?

Utilizamos la tecnología verde para reciclar los recursos petroleros usados.

Producimos profesionalmente la máquina de refineía de los neumáticos gastados,la máquina de refineía de los plásticos desusados ,la máquina de destilación de aceites usados etc.

Funciona automáticamente 10T equipo de pirólisis de neumáticos gastados

Funciona automáticamente 10T equipo de pirólisis de neumáticos gastados

Los parámetros técnicos de 10T equipo del pirólisis de los neumáticos gastados

Artículos                      Contenido
Primas material                Neumáticos,plásticos, residuos del caucho

Forma de estructura            Horizontal
Modelo                       HY-6T  HY-8T   HY-10T
Tamaño del reactor            D2200mm * L6000mm D2600mm * L6600mm D2800mm * L6000mm
Capacidad de 24 horas         6T   8T   10T
Presión                       Constante presión
Material del calentamiento       carbón, gas , aceite combustible
Tasa media de aceite de sali-da  45% -50%
Material del reactor              Paca de la caldera Q345R
Espesor del reactor              16mm/18mm
Velocidad del reactor             0.4 vuelta / minuto
Modo de enfriamiento            Refrigeración por el agua
Potencia                        20 kw
La vida del reactor               500-750 lotes

Unas detalles a les interesan:

Modelo  Tamaño del reactor volumen capacidad Nota Tiempo de alimentación Tiempo de descarga Cooling
time
Discharge carbon
time
HY-2200-6000 2200*6000mm 20.7 M³ 5 MT/Lote 3 Lotes 2dísa 1-2 horas 7-9 horas 1 hours 1-2 hours
HY-2200-6600 2200*6600mm 25.1 M³ 6 MT/Lote 3 Lotes 2dísa
HY-2600-6000 2600*6000mm 31.8M³ 8 MT/Lote 1 Lote 1 dís 2-3 horas 10-12 horas 1 hours 2-3 hours
HY-2600-6600 2600*6600mm 35.0M³ 9 MT/Lote 1 Lote 1dís
HY-2800-6000 2800*6000mm 36.9 M³ 10 MT/Lote 1 Lote 1dís 3-4 horas 12-14 horas 1 hours 3-4 hours
HY-2800-6600 2800*6600mm 40.6 M³ 12 MT/Lote 1 Lote 1 dís

 

see more at: http://www.tire-recycling.es/machinery/112.htm

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

Rich experienced tire pyrolysis plant manufacturer:

Huayin company has dedicated to plastic/tire pyrolysis plant field since 1993 and now we have gone through a journey of 21 years of wind and rain. For so many years, with the concept of continuous innovation, huayin company always leading first of China pyrolysis plant industry. With the development of economic globalization, huayin company actively participate in the world market and gained fine reputation from global customers. Until today, more one thousand huayin waste tyre/plastic pyrolysis plant were installed worldwide. With professional technique, mature technology and rich experience, we are confident that we can create a more brilliant tomorrow with friends around the world!

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

Pyrolysis plant working process:

Automatic feed → catalytic cracking → oil-water separation → cooling liquid → carbon black emission → carbon black processing → crude oil → flammable gas recovery → flammable gas combustion → dust removal

Working time of pyrolysis plant:

Model Feeding Processing Cooling Discharge Total
2200*6000 2hr 7-8hr 2hr 2hr 14hr
2200*6600 2hr 8hr 2hr 2hr 14hr
2600*6000 3 hr 10 hr 3 hr 3 hr 19 hr
2800*6000 3 hr 12 hr 3 hr 3 hr 21 hr
2800*6600 3 hr 13-14 hr 3 hr 3 hr 23 hr
10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

Huayin tire pyrolysis plant technical improvement:

1. There is a slope in the reactor thus facilitate to pull steel wire out of the reactor.
2. The diameter of the oil outlet expand from 630mm to 1000mm thus avoids the oil outlet breakdown in case of power outage. We all know that the reactor keeps rotating under normal circumstances, once there is a power failure, reactor stops rotating, the raw materials in the reactor under processing will sticking to the furnace wall that may make the reactor incline to one side. The sudden action of gravity do harm to stability of oil outlet pipe. We do this improvement to ensure the sturdiness of the oil outlet.
3. The gear of the oil outlet use cast steel with better toughness instead of cast iron.
4. The reducer uses cast steel replaces the previous cast iron material that can bear long-distance transportation and strong vibration with much longer lifetime.
5. The reactor adopts solderless joint technique together with carbon arc air gouging technique that guarantee the reactor have better performance without leakage.
6. Condensing system determines the oil yield to a great extent, the higher the yield is, the greater benefit you will get. Huayin tire pyrolysis plant adopts three steps cooling system: First step: cooling water and crude oil and pouring oil into the first heavy oil tank through oil-water separator. Second step: cooling light oil and pouring it into the second measuring tank. Third step: cooling the oil gas and exhaust gas (main composition of natural gas are methane, ethane, butane, hydrogen, etc ). Separating the gas above C4H, gas below C4H which can not be liquified under normal pressure can be recycled to furnace thus energy saving and environmental friendly.

Final products:

Oil Yield
Raw Material Oil Yield Steel wire Carbon Black Water
Waste tire/Rubber Big tires 45%-50% 15%-20% 30% 5%-10%
Car tires 40% 10%-15% 45% 5%-10%
Cycling or Motorcycle tires 30%-35% 5%-10% 45% 5%-10%
Waste plastic Fishing net 45%-50% 30%
Safety net; Farming film 45%-50% 25%
Convenience bag; Woven bag 40% 30%
Offcut from recycled paper plant 20%-30% 20%
Oil recycling10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling plant suppliers, professional manufacturer, xinxiang huayin

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

Welcome to visit us:

Huayin company has christian background, our corporated culture reflect one word, that is love. Our boss Mr.Guo is a devout christian, Jesus is his faith. He believes that he can do a successful career with love as jesus save the world with his love. We firmly believed that love can bring us together and help us build a better enterprise. Welcome your inquiry and come to our factory to visit running tire pyrolysis plant.

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

10 ton hot sale tire pyrolysis plant for waste tire and plastic recycling

 

Professional manufacturer of waste tyre pyrolysis plant

21 years experience tyre pyrolysis plant manufacturer:

Huayin company is specialized in manufacturing waste management machine. After years’ of research, experiment and innovation, we feel honor to introduce you waste tyre pyrolysis machine, waste plastic pyrolysis plant, waste oil distillation machine and decoloring equipment. Instead of landfill or burning, this is a green solution to process waste tyre and waste plastic to fuel oil. HUAYIN has professional production lines with clear division of work, technical laboratory with the ability to test various parameters of oil products, rich experienced engineers to guarantee the installation and training of your workers. Additionally, we have different kinds of running machines in our factory for customer visiting. We have certificates of ISO9001, ISO14001, CE, BV, SGS and 11 patents for our equipment. HUAYIN can manufacture equipment according to your special requirements. Honesty is our principle in international trade, it brings us friendships with customers and build up a fine reputation in the market. Welcome your visiting to HUAYIN. Looking forward to have a good cooperation with you.

Eco-friendly waste tyre pyrolysis plant:

The pollution of waste tyre pyrolysis plant mainly comes from the four aspects: waste waster, waste gas, waste slag and noise pollution.
1. Waste water: The waste water consists of two parts: condensing water and dust removing water. The condensing water are recycling water, the final released waster will not cause any environmental pollution, but the water temperature is a bit high. The dust removing water are circulating water, they will be evaporated without any emissions.
2. Waste gas: Waste gas also include two parts. First,the waste oil gas, it can’t be liquified under normal pressure, Huayin waste tyre pyrolysis pant have advanced exhaust gas recovery system to recycled the gas back to heating system to heat the reactor; Second, waste smoke, it is generated from burning coal or wood, while, with our high-tech dust removing system, the exhaust can meet European emission standards.
3. Waste slag: it is also called crude carbon black as byproduct, it was generated during the pyrolysis process, the market value is about 400-500 Yuan per ton, if you want make further process of it, it can be value about 4000-5000 Yuan per ton, the carbon black slag is usually used in rubber and plastic factory. Now huayin has invented the machine to process carbon black into color master, welcome your purchase.
4. Last, noise: Huayin waste tire pyrolysis plant adopts low noise fan equipment, the noise is less than 60 decibels, noise of power part and auto-feeder are not more than 50 db. If there are any greening trees around your factory, the noise is below 50 in the day and 45 decibels at night.

All-around safety tyre pyrolysis plant:

Whatever you engaged in which industry, safety is the first important factor. Once there is serous accident happens, you business may goes to ruin.
We know that the waste tyre pyrolysis plant industry emerged in recent years with high profit and high risk. When the oil gas, oxygen and high temperature mixed together, there will be a disastrous explosion. So comprehensive safety device is the guarantee for normal operation of the enterprise. Technology is the key point. huayin company is engaged in waste management recycling field for 21 years and mastered mature technology. All of our equipment have pressure gauges, alarms, safety valves, and also specialist anti-blocking device to guarantee personal safety.
The following 3 factors are responsible for explosions in tyre pyrolysis plants:
1. The reactor will create methane, ethane, propane, butane and so on from the tyres/plastic during heating. These gases should be prevented from re-entering the reactor.
2. Oxygen.
3. Temperature.
When these three factors combine, it will cause an explosion.
1)  Our Plants have an oil-water separator and an anti-blowback device which contains water in it; it will stop the oil gas from blowing back to the reactor. Because the oil gas passes through water and comes out as bubbles, it’s impossible for blow back to occur this eliminates the first factor.
2)  Our machine can discharge carbon black and slagging automatically. There is a slag discharge pool alongside the reactor, and the cover has water all around the edge. This pool connects with the furnace, so the oxygen inside it will be consumed and thus create a vacuum. As no oxygen can re-enter because of the water pool the second factor is also eliminated.
3)  When factors1 and 2 are eliminated, the possibility of explosion is negated. Our Reactors are manufactured to the exacting standards of pressure vessels. The materials of the 5th generation reactor are Q245R or Q345R boiler steel, these two materials exhibit high temperature and heat resistance.

Huayin waste tyre pyrolysis plant manufacturing:

 

In Huayin manufacturing shop, we adopt automatic machines instead of handwork. On the one hand, the productions ability is increased even with less workers. On the other hand the quality of products is improved because by machine the manufacturing procedure is more accurate. We choose high quality for all materials, including the plate of reactor and accessories, the motors, the shell cover, the roller, the gear, the reducer, the insulation material, the sealing material etc. We pay attention to details in each process. See the manufacturing pictures:

After sales service:

Huayin company provides superior after sales service. We will arrange experienced engineer to your country to guide your workers installing the machine, traning your workers and debugging the equipment operation. Welcome to our factory visiting huayin running tyre pyrolysis plant!

 

See more at: http://www.oilpyrolysis.net/products/15.html

5 Ton to 10 Ton Waste Tyre Recycling Pyrolysis Plant

Waste to wealth tyre plastic pyrolysis plant:

One complete set of huayin waste tyre/plastic pyrolysis plant was composed by 1527 large and small components. Started in 1993 in Xinxiang, China, our R&D team never stop innovation and solved lots of technical problems. Nowadays, we pay more attention on details, we devoted to build a perfect tyre pyrolysis machine for our customers. All HUAYIN people dedicated to support real profitable equipment for our clients throughout the world! The following passage will give you a comprehensive introduction from all aspects. Welcome your friendly inquiry anytime.

Tyre pyrolysis plant technical parameters:

In order to meet different customers requirements, we design six different size reactor with large, middle and small capacity. You can choose suitable machine depends own situation, you can also ask our engineer give you advice.

NO. Model Reactor size volume capacity Note
1 HY-2200-6000 2200*6000mm 20.7 M³ 5 MT/Batch 3 batches 2days
2 HY-2200-6600 2200*6600mm 25.1 M³ 6 MT/Batch 3 batches 2days
3 HY-2600-6000 2600*6000mm 31.8M³ 7 MT/Batch 1 batch 1 day
4 HY-2600-6600 2600*6600mm 35.0M³ 8 MT/Batch 1 batch 1 day
5 HY-2800-6000 2800*6000mm 36.9 M³ 9 MT/Batch 1 batch 1 day
6 HY-2800-6600 2800*6600mm 40.6 M³ 10 MT/Batch 1 batch 1 day

Working time of different size pyrolysis plant:

 

Model Feeding Processing Cooling Discharge Total
2200*6000 2hr 7-8hr 2hr 2hr 14hr
2200*6600 2hr 8hr 2hr 2hr 14hr
2600*6000 3 hr 10 hr 3 hr 3 hr 19 hr
2800*6000 3 hr 12 hr 3 hr 3 hr 21 hr
2800*6600 3 hr 13-14 hr 3 hr 3 hr 23 hr

Various kinds of raw materials oil yield:

 

Oil Yield
Raw Material Oil Yield Steel wire Carbon Black Water
Waste tire/Rubber Big tires 45%-50% 15%-20% 30% 5%-10%
Car tires 40% 10%-15% 45% 5%-10%
Cycling or Motorcycle tires 30%-35% 5%-10% 45% 5%-10%
Waste plastic Fishing net 45%-50% 30%
Safety net; Farming film 45%-50% 25%
Convenience bag; Woven bag 40% 30%
Offcut from recycled paper plant 20%-30% 20%

Let’s see Huayin plastic tyre pyrolysis plant manufacturing art:

 

In most manufacturing processes, we replace handwork by automatic machines. On the one hand, the productions ability is increased even with less workers. On the other hand the quality of products is improved because by machine the manufacturing procedure is more accurate.
We choose high quality for all materials, including the plate of reactor and accessories, the motors, the shell cover, the roller, the gear, the reducer, the insulation material, the sealing material etc. We pay attention to details in each process.

FAQ  realted to tyre pyrolysis plant:

1. How to deal with the waste gas?
The extra waste gas could not be emitted directly in the air, as it would get accumulated in the surroundings, and even a single spark can lead to blast. The waste gas is transferred back to the heating chamber to heat the reactor as fuel. During this period, the whole plant only cost little coal. It is hard to store this waste gas, because this gas is coming together with the tyre oil gas. The cost for storing this waste gas is more than the profit this waste gas can give. So usually this waste gas is burnt for heating the reactor.Waste tyre pyrolysis plant
2. Carbon black gets accumulated at its oil-out pipe. How it can be auto-shifted to the store?
In the reactor, there is weld spiral plate on inwall. When one batch finished, cool down the reactor for several hours. Open the carbon black slag door, let the reactor rotating in the opposite way, the carbon black will be transferred out automatically. Then you can dig a pool beside the carbon black door, the carbon black will drop into the poor, then you can use the spiral carbon black dregs machine to help.
3. They say that oil should be removed from the tank before running next batch. Then whether another oil tank is required so that we can produce continuously?
Yes, they are right, the oil shall be pumped out before running next batch. We provide the oil pump. For the oil tanks, we can’t provide very big one, because the containers don’t have enough space. The customer need to prepare one big oil tanks by himself. Waste tyre pyrolysis plant
4. What is the application of raw carbon black?
Usually, the carbon black is sold out directly as rough carbon black. Or the carbon black can be refined again, become good carbon black with a higher mesh.
5. What about the steel wire? How to remove it?
Steel removal is a big question, as it gets entangled in the reactor. Now, the steel is easy to be out. When the carbon black finish discharging there is only bunches waste steel inside the reactor. Then pull it out. You can use the steel wire hook in the auto feeder, it is very convenient.

Customer visiting:

Huayin factory have six running machine for our clients come to China to visit. We also have professional technique to answer your questions and give you guidance.

 

Waste tire pyrolysis plant, waste tire to oil

Waste tire recycled to crude oil is a hot business in the world. On one hand, it’s a green way for waste tire recycling, the whole working process is pollution free, it will make a big difference to the environment protection. On the other hand, we can many useful things from waste tire, like crude oil, carbon black and steel wire. This is also a profitable project. The equipment we need for this project named waste tire pyrolysis plant, here, i will introduce you our waste tire pyrolysis plant.
Waste tire pyrolysis plant, waste tire to oil

Main components of waste tire pyrolysis plant:

A: Reactor:

The material of reactor is Q345R. Q345R is mainly used for pressure vessel because it can be continuously heated for long time.
Auto-welding.
The reactor is fully covered by thermal insulation. Heat preservation effect is good.
The gear is separated from the reactor. It avoids deformation after being heated for long time. Even it is broken you only need to change the gear. The maintenance cost is low.
Gaps are sealed by asbestos pad.
There is an safety net inside the reactor. It prevents the raw materials going to accessories and avoiding blocking.
There are spiral plates inside of the reactor cab help to auto-feed and slag.
Feed port is round shape. It can work with auto-feeder. It helps you feed more raw materials and improve productivity.

B: Catalyst Chamber :

Reduce the speed of oil gas.
Purify oil gas.
Catalyst improves oil quality and oil yield.

C: Oil-water Separator :

Purify oil gas with recycling water.
Water sealing design guarantees that the tail gas can not go back to reactor so keep machine safe.
Separate heavy oil and water.
Make heavy oil go into first oil tank.

D: Oil Tank :

There are 4th generation oil tank and 5th generation oil tank. One is the heavy oil tank and the other is the light oil tank.

E: Anti-back fire device :

Recycle tail gas to furnace. It is environmental protection and saves your fuel.
Water sealing design guarantees that the tail gas can not go back to reactor and accessories so that keep machine safe.

F: Negative Pressure Device :

Guarantee that the machine is working under normal pressure. Keep our machine safe.
Guarantee that there is no gas running out from reactor when you are feeding.
Prolong the service life of reactor.

G: Draught Fan :

We use the famous draught fan, so you can use it for a long time and noise. It’s good for the environment. Also the low noise can not influence of worker’s ears.

H. Auto-feeder:

50 ton hydraulic, can feed the whole tire, saving labor and time.

I. Condenser:

the oil gas is cooled separately by small pipes inside condenser, light oil is collected here.

J. Dust remove system:

dispose of fuel gas caused by using coal, wood, oil or natural gas.
Waste tire pyrolysis plant, waste tire to oil

Final products of waste tire pyrolysis plant:

Waste tire pyrolysis plant,green way to recycle waste tire

Waste tire pyrolysis plant,green way to recycle waste tire

Profit analysis:

(here we take 10 ton waste tire pyrolysis plant as example)

Cost:

Raw material cost: ___ USD / TON×10Ton= ___USD
Fuel material cost:  ___ USD / KG×___ KG= ___USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___USD/KW×20hours= ___ USD
Worker’s salary:  ___ USD/Day×4Persons= ___  USD

Profit:

Oil Profit: ___ USD/Ton×4.5Ton= ___ USD
Carbon black: ___ USD/Ton×3Ton= ___ USD
Steel wire: ___ USD/Ton×1.5Ton= ___ USD

Gross Profit:

Total profit ___ USD - Total cost ___ USD= ___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Certificates:

Waste tire pyrolysis plant, waste tire to oil

HUAYIN customers:

Waste tire pyrolysis plant, waste tire to oil

CNC machinery:

Waste tire pyrolysis plant, waste tire to oilXinxiang huayin renewable energy equipment CO., Ltd is a professional manufacturer and supplier of waste tire pyrolysis plant, we have 20 years experience in this field, our waste tire pyrolysis plant adopt high technology, special design and top quality material, all these make us in the leading position of this industry. Our company has an unique christian background, honesty is our principle, welcome your inquiry and visiting.
Email: huayin@oilpyrolysis.com