Simple operation waste tyre recycling plant

The red beautiful machine on the picture is named 10-Ton waste tyre recycling plant for Waste Tires, which is among the best sellers throughout year 2014.
Just her name implies, she is majoring in pyrolyzing used tires to kinds of valuable substances under normal pressure. She can contain 10-15 tons of waste tires, whole or cut ones, large or small, and run about 23hours continuously within one day with about 4 people watching. The valuable outputs are following: largest amount of tire crude oil, carbon black, and steel wire. Each of them is well salable.
Technically, she is composed of more than one thousand components, among which are large, and others are precise. Among the large units, most are patented products. What is more, she owns BV, CE, and ISO, proving her safety and quality guarantees. Safety and quality issues are always the most concern of Xinxiang Huayin Renewable Energy Equipment Co., for every life is incomparable.
In the meantime, a plenty of advantages she carries are absolutely not ignored. Safe, there are at least three big safety devices, which are connected with the reactor and cooling system, to avoid syngas going back to the reactor causing accidental explosion; besides, several safety valves are working together with the alarms to keep the reactor running under normal pressure in case the workers are absent of the site unexpectedly. Environmental friendly, chemical water is employed in dedusting system to cleanse the smoke to steam, and waste water from the cooling system and syngas from burning processing both can be recycled to the reactor and go back to the cooling system, such as heating the reactor and run as circulating cooling water again; thus air and water pollution are avoided. Energy-saving, used circular water from the cooling system and syngas both can be reused to save a lot of fuel energy and clean water, therefore reducing a large amount of cost for clients.
Last but not in the least, the available markets for the above outputs are not hard to search, actually very broad. First, the fuel oil from waste tires can be sold to manufacturers such as power plant, glass factory, cement factory, ceramic factory, boiler factory and so forth. Second, tire carbon black can be processed to make briquette and rubber in a unique formula with good price. At last, the steel wire is also recyclable. All the outputs have good selling lines, plus most waste tyre recycling plant run in industrial zone which include huge markets.

– See more at: http://www.huayinenergy.com/Product/Pyrolysis-Plant/Simple_operation_waste_tyre_recycling_plant_496.html#sthash.RzuZCwPC.dpuf

High oil yield waste tyre recycling machine

Waste tyre recycling machine is used for the management of waste tyre, plastic and used rubber, it’s a hot business now, instead of landfill or burning, waste tyre recycling machine could extract fuel oil from tyre, plastic and rubber. This is a green technology, our machine is high oil yield, bring you great profit.

High oil yield waste tyre recycling machine

Profit analysis:

(Here we take 10ton waste tyre recycling machine as example)

Cost:

Raw material cost:___ USD / TON×10Ton= ___ USD
Fuel material cost:___  USD / KG× ___ KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___ USD/KW×20hours= ___ USD
Worker’s salary:___ USD/Day×4Persons=___ USD

Profit:

Oil Profit: ___ USD/Ton×4.5Ton=___USD
Carbon black:___ USD/Ton×3Ton= ___ USD
Steel wire: ___ USD/Ton×1.5Ton=___ USD

Gross Profit:

Total profit ___ USD - Total cost ___ USD=___ USD
Note: you could calculate profit based on local situation. Generally speaking, you can recover your cost in 4 to 5 moths.

Low cost, high profit:

1, Raw material, waste tire(or waste plastic, use rubber) is very cheap, they are garbage for common people, you could buy them at a very low price.
2, Heating material, you could use coal, wood, fuel oil or gas as heating material. our reactor has the cotton insulation in the shell, it can improve temperature, making uniform fire, and tire conservation cracking fully, improving the output. During process, there will be some gas couldn’t be cooled, which can be recycled to the furnace for heating, saving your cost.
3, Our waste tyre recycling machine is fully automated, need only 2 to 4 workers to operate, also saving your cost.

Final products:

High oil yield waste tyre recycling machine

High oil yield waste tyre recycling machine

Parameters of our waste tyre recycling machine:

 

High oil yield waste tyre recycling machine

High oil yield waste tyre recycling machine

High oil yield waste tyre recycling machine

Advantages of our waste tyre recycling machine:

1> Security:

a :Adopting automatic submerged welding technology
b: Adopting manufacture process controlling system .
c: Steam pressure and water pressure

2> Environmental-friendly:

 Emission Standard: Adopting special gas scrubbers
 Smell during operation: Fully enclosed during the operation
 Water pollution: During the operation, the water we use is recycling one to cool down the gas-oil and convert into liquid oil in the condensers. No pollution at all.
 Solid pollution: the solid after pyrolysis is the crude carbon black and steel wires which can be deep-processed or sold directly with its value.

 3> Full open door design:

Speedy Loading in and steer drawing out, easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible Graphite packing

4> Fully enclosed Carbon black discharging system under high temperature

5> Energy conservation and low cost on operation

High oil yield waste tyre recycling machine

Certificates:

High oil yield waste tyre recycling machine

HUAYIN customers:

High oil yield waste tyre recycling machine
CNC machinery:

High oil yield waste tyre recycling machine

HUAYIN company is a professional manufacturer and supplier of waste tyre recycling machine, after 20 years research and development, that’s a great honor for us to introduce you our waste tyre recycling machine, we are the best in this field, welcome your inquiry and visiting.

Waste tire recycling plant for sale

  Founded in 1993, xinxiang huayin renewable energy equipment CO.,Ltd took the leading position in this project in China. After 20 years research and improvement, our products are constantly updated,it is a great honor for me to introduce you the waste tire recycling plant manufactured by our company.
Waste tire recycling plant for sale

Raw materials for waste tire recycling plant:

Waste tire recycling plant for sale

Waste tire recycling plant for sale

Waste tire recycling plant working process:

Firstly, put the raw material into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal. wood, gas or oil) in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the Catalytic Chamber to speed up the reaction and clean out the wax and other impurity. Then go to water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.
At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.
Waste tire recycling plant for sale

Usage of the final products:

1, Oil usage: you could sell it to oil refining factory directly, use it for heating.
2, Carbon black usage: you can sell it directly, or make further process. There are two ways to process carbon black.
First, you could use a grinder machine, grind the carbon black into 800-1200mesh or more, then sell it into plastics factory, tube factory, rubber factory…
Second, you could use carbon black pellet machine, make the powder carbon black into carbon black pellet, then could use it for heating.
3, Steel wire usage: you can sell the steel wire directly. It can be valued about 2000RMB per ton in China.

More information about waste tire recycling plant:

Waste tire recycling plant for sale

Waste tire recycling plant for sale

 

Profit analysis:

(here we take 10 ton waste tire recycling plant as example)

Cost:

Raw material cost: ___ USD / TON×10Ton=  ___ USD
Fuel material cost:  ___ USD / KG× ___KG=  ___  USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___ USD/KW×20hours= ___ USD
Worker’s salary: ___ USD/Day×4Persons=  ___ USD

Profit:

Oil Profit: ___ USD/Ton×4.5Ton= ___ USD
Carbon black: ___ USD/Ton×3Ton= ___ USD
Steel wire: ___ USD/Ton×1.5Ton= ___ USD

Gross Profit:

Total profit  ___USD - Total cost  ___  USD= ___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Waste tire recycling plant for sale
Certificates:

Waste tire recycling plant for sale

HUAYIN customers:

Waste tire recycling plant for sale
CNC machinery:

Waste tire recycling plant for sale

Waste tire recycling plant is a green technology and profitable investment opportunity, HUAYIN welcome your inquiry and visiting. We will provide you the best equipment and services.

Tyre recycling equipment, with 45%-50% high oil yield

Tyre recycling equipment is a device used to recycle waste tyre, plastic and used rubber, the raw materials are very cheap and easily found in rubbish station, even you could get subsidy from government for doing this job. Compared with landfill or burning, tyre recycling equipment is a green technology and a better way for waste management. Meanwhile, the fuel oil you get has a very good market.

Tyre recycling equipment, with 45%-50% high oil yield

Details of tyre recycling equipment :

Tyre recycling equipment, with 45%-50% high oil yield

Tyre recycling equipment, with 45%-50% high oil yield

 

Tyre recycling equipment, with 45%-50% high oil yield

Working process of tyre recycling equipment:

First, put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tire will be transferred to oil gas.
Second, the liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can’t be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.
Fourth, smoke produced by processing the tires/plastics can achieve national emission standard through dual desulfurization and dusting removal device.
Fifth, after you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.
Tyre recycling equipment, with 45%-50% high oil yield

Final products:

The final products we can get from tyre recycling equipment include crude oil, carbon black, steel wire and exhaust gas.

Usage of the final products:

Tyre recycling equipment, with 45%-50% high oil yield

Tyre recycling equipment, with 45%-50% high oil yield

 

Profit analysis:

(here we take 10 ton tyre recycling equipment as example)

Cost:

Raw material cost: ___ USD / TON×10Ton= ___ USD
Fuel material cost: ___  USD / KG× ___ KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h  ___ USD/KW×20hours= ___ USD
Worker’s salary: ___ USD/Day×4Persons= ___ USD

Profit:

Oil Profit: ___ USD/Ton×4.5Ton= ___ USD
Carbon black: ___ USD/Ton×3Ton= ___ USD
Steel wire: ___ USD/Ton×1.5Ton= ___ USD

Gross Profit:

Total profit  ___ USD - Total cost  ___ USD=  ___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.

Advantages of our tyre recycling equipment:

Safety :

We treat safety as the first important thing in production.
1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or negative pressure.
3) Temperature monitoring device to avoid excessive working temperature.
4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid catching fire.

B. Environmental protection:

1) The flue gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.
2) The procedure to remove carbon black is working under closed situation to avoid pollution.

C. High oil yield:

1. We have 3 steps for cooling system: one condenser pipe, two large horizontal condensers and two vertical condensers. The oil gas pass through 3 steps cooling system in sequence. The total cooling area is 65 square meter.
2. When the oil gas pass through the condensers, it’s divided into several portions by small pipes inside condenser and be cooled separately.
3. In this way we maximize the cooling effect and improve the oil yield.

D. High oil quality:

The oil gas is purified by molecular sieve inside catalyst chamber so that the quality of oil is higher.

E. Energy saving:

1) The flame path is designed as spiral so that the quantity of heat can be fully used.
2) The residual gas from pyrolysis is recycled to furnace burning to heating the reactor.
3) The insulation cover is formed by 3 levels: steel plate, rock wool and refractory cement. Excellent thermal insulation effect helps saving fuel.

F. High degree of automation:

1) In manufacturing we use auto cutting machine, auto welding machine, auto rolling machine so that both quality and appearance of our products can be guaranteed.
2) In production, we use auto-feeder to feed raw materials into auto-feeder. By auto-feeder it needs few workers and less time to feed. And because of 50 ton hydraulic pressure from auto-feeder, it can feed more tires than labor.

G. Long service life:

1) The material of reactor is Q345R boiler plate with 16/18mm thickness which is produced by Chinese well-known enterprise. The head of reactor and accessories are using one-piece molding shell cover rather than welded plate.
2) All cutting, rolling and welding works are finished by automatic machines.
3) We know quite well about the material quality and manufacturing process, that’s why we are confident in the service life of our products.
4) We also supply installation service, training service and one year warranty.
Tyre recycling equipment, with 45%-50% high oil yield

Certificates:

Tyre recycling equipment, with 45%-50% high oil yield

HUAYIN customers:

Tyre recycling equipment, with 45%-50% high oil yield

CNC machinery:

Tyre recycling equipment, with 45%-50% high oil yieldTyre recycling equipment produced by HUAYIN company is a green way for waste tire recycling, no pollution, energy saving, high degree of security and long service life, all these features make our tyre recycling equipment famous on market. HUAYIN is a company with an unique christian background, honesty is our principle, we are a reliable friend for you. Welcome your inquiry and visiting.

Best selling, HUAYIN 5th generation waste tire pyrolysis plant

Founded in 1993, HUAYIN company is a professional manufacturer and supplier of waste tire pyrolysis plant with rich experience. 20 years ago, our boss, Mr Guo invented the first generation waste tire pyrolysis plant, it’s a good way for waste tire recycling, instead landfill or burning, this plant could extract crude oil from tires, and the whole working process is pollution free. From then on, we pay more attention to this project. Our products have be sale to many foreign countries, we won a good reputation from our customers. Up to now, we have developed 5 different generation plant. Here, i’d like to introduce you the 5th generation waste tire pyrolysis plant.

Details of waste tire pyrolysis plant :

Model HY-6T HY-8T HY-10T
Size of Reactor D2200mm*L6000mm D2600mm*L6000mm D2800mm*L6000mm
24-hour Capacity 6 tons 8 tons 10 tons
Raw Material Tire/plastic/rubber
Average oil rate 40-45%
Material of Reactor Q345R boiler plate
Thickness of Reactor 12/14/16mm
Rotate speed of Reactor 0.8turn/minute
Total power 20KW
Mode of cooling Water cooling
Diameter of feeding door 750mm/1200mm
Driving method Gear drive
Floor space 150sq.m.
Final products Crude oil 45%-50%
Carbon black 25%-30%
Steel wire 10%-15%
Gas 5%

 

Working process of the waste tire pyrolysis plant:

First, put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tire will be transferred to oil gas.
Second, the liquid oil will be cooled by condenser from oil gas and then collected by oil tank.

Third, the exhaust gas which can’t be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.

Fourth, smoke produced by processing the tires/plastics can achieve national emission standard through dual desulfurization and dusting removal device.
Fifth, after you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.

Final products:

The final products we can get from waste tire pyrolysis plant include crude oil, carbon black, steel wire and exhaust gas.

Usage of the final products:

NO. End products Productivity      Usage
1 Crude  oil 45% A. Sell directly.
B. Turn to diesel and gasoline by oil distillation machine.
C. Fuel materials.
2 Carbon black 30% A. Sell directly.
B. Reprocessing to fine carbon by carbon black refining machine.
3 Steel wire(for waste tyre) 15% A. Sell directly.
B. Deep processing to steel bloom by hydraulic press-packing.
4 Flammable oil gas 10% A. Fuel burn by use gas burn system(pyrolysis machine included)
B. Flammable gas can be storage as fuel material for heating.

Main features:

A,Safety:

1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Professional heating treatment and x-ray detection chamber are especially for welding.
3. Vacuum system will prevent oil gas from going back to reactor and causing accident.
4. Professional thermometer, pressure gauge and safety valve.
5. It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production

B,Environment friendly:

1.Well water de-dusting system can avoid black smoke.
2.The exhaust gas will be recycled for heating reactor, no gas pollution
3.Every junction of the reactor is in good sealing situation with professional sealing material.

C,Long service life:

1.Material: Q245R special steel plate ,thickness 14mm.
2.Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
3.The service life of the reactor will be 8 -10 years

D,Energy saving:

1. Well sealing for heating system , no gas leak and saving fuel.
2. The exhaust gas will be recycled for reactor heating .

Waste tire pyrolysis plant produced by HUAYIN company is a green way for waste tire recycling, no pollution, energy saving, high degree of security and long service life, all these features make our waste tire pyrolysis plant famous on market. HUAYIN is a company with an unique christian background, honesty is our principle, we are a reliable friend for you. Welcome your inquiry and visiting.

Waste tire pyrolysis plant, a green way for waste tire recycling with great economic profit

Waste tire pyrolysis plant of HUAYIN is to convert waste tire or waste plastic into fuel and energy. The raw material of waste tire pyrolysis plant is waste tire, waste plastic and waste rubber and so on. And the final products of waste tire pyrolysis plant is fuel oil, carbon black, steel wire and exhaust gas.

Working process of HUAYIN waste tire pyrolysis plant:

Firstly, put the raw material into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal. wood, gas or oil) in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the Catalytic Chamber to speed up the reaction and clean out the wax and other impurity. Then go to water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.
At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.
(automatic feed → catalytic cracking → oil-water separation → cooling liquid → carbon black emission → carbon black processing → crude oil → flammable gas recovery → flammable gas combustion → desulfurization removal.)

Final products from waste tire pyrolysis plant:

Fuel Oil: 40% to 45%
Crude Carbon Black: 30% to 35%
Steel Wire: 15% to 20%
Gas: 5%

Application of the Outputs:

Fuel Oil: Can be used as industrial fuel for burning.
Crude Carbon Black: Can be sold to the brick factory as internal combustion or to the factory needing it as raw materials, such as tire, shoe, cable and sealant companies.
Steel Wire: Can be sold to the iron and steel company directly.
Gas: Can return to the hearth to burn as fuel, so that you can save cost to buy wood or coal.

Profit analysis:

Take waste tire pyrolysis plant processing 10 tons for example

No. Item Cost of Per Batch
1 10 tons waste tire 10T×1500RMB/T=15,000RMB
2 0.4 tons of coal 0.4T×800RMB/T=320RMB
3 Water and electricity 200×1.00RMB=200RMB
4 Workers salary 4×100RMB=400RMB
5 Total Cost 15,920RMB
NO. Item Profits
1 Pyrolysis Oil 10T×45%×4,500RMB=20,250RMB
2 Carbon Black 10T×35%×520RMB=1,820RMB
3 Steel Wire 10T×13%×2200RMB=2,860RMB
4 Gross Profit 24,930RMB
5 Daily Net Profit 24,930RMB-15,920RMB=9,010RMB
6 Monthly Net Profit 9,010RMB×25=225,250RMB
7 Yearly Net Profit 225,250RMB×10=2,252,500RMB

More information:

Model HY-6T HY-8T HY-10T
Size of Reactor D2200mm*L6000mm D2600mm*L6000mm D2800mm*L6000mm
24-hour Capacity 6 tons 8 tons 10 tons
Raw Material Tire/plastic/rubber
Average oil rate 40-45%
Material of Reactor Q245R boiler plate
Thickness of Reactor 12/14/16mm
Rotate speed of Reactor 0.8turn/minute
Total power 20KW
Mode of cooling Water cooling
Diameter of feeding door 750mm/1200mm
Driving method Gear drive
Floor space 150sq.m.
Final products Crude oil 45%-50%
Carbon black 25%-30%
Steel wire 10%-15%
Gas 5%

HUAYIN company is a professional manufacturer and supplier of waste tire pyrolysis plant, we have 20 years’ experience in this area, HUAYIN waste tire pyrolysis plant adopt high technology, which is high efficiency, environmental protection and high degree of security.

Energy saving and pollution free waste tire recycling machine

Waste tire recycle is a hot business now, as far as i know, there are lots of manufacturers of waste tire recycling machine, thus, on the market, all kinds of waste tire recycling machine making customer confused, it’s a hard work to choose a good machine. Today, i particularly introduce you waste tire recycling machine, i hope the information i present here could help you to make your choice.

Details of waste tire recycling machine:

Model HY-6T HY-8T HY-10T
Size of Reactor D2200mm*L6000mm D2600mm*L6000mm D2800mm*L6000mm
24-hour Capacity 6 tons 8 tons 10 tons
Raw Material Tire/plastic/rubber
Average oil rate 40-45%
Material of Reactor Q345R boiler plate
Thickness of Reactor 12/14/16mm
Rotate speed of Reactor 0.8turn/minute
Total power 20KW
Mode of cooling Water cooling
Diameter of feeding door 750mm/1200mm
Driving method Gear drive
Floor space 150sq.m.
Final products Crude oil 45%-50%
Carbon black 25%-30%
Steel wire 10%-15%
Gas 5%

Waste tire recycling machine working process:

First, put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tire will be transferred to oil gas.
Second, the liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can’t be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.
Fourth, smoke produced by processing the tires/plastics can achieve national emission standard through dual desulfurization and dusting removal device.
Fifth, after you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.
Last, when the temperature falls to 100 degree Celsius, worker could put steel wire hook to reactor to take steel wire out. After all these steps, you can start another batch.

Output information:

Fuel Oil: 40% to 45%
Crude Carbon Black: 30% to 35%
Steel Wire: 15% to 20%
Gas: 5%

Application of the Outputs:

Fuel Oil: Can be used as industrial fuel for burning.
Crude Carbon Black: Can be sold to the brick factory as internal combustion or to the factory needing it as raw materials, such as tire, shoe, cable and sealant companies.
Steel Wire: Can be sold to the iron and steel company directly.
Gas: Can return to the hearth to burn as fuel, so that you can save cost to buy wood or coal.

Main features of waste tire recycling machine:

1. Low cost: The raw material can be used tire, waste plastic or any other wastes with low price even free, while, the final products have high profits.
2. Easy to operate,with low operation cost: Huayin waste tire recycling machine exported to India adopts simple design to operate with only 1-2 workers can control the set of the machine.
3. In addition to tire pyrolysis plant, we also have used oil distillation machine to help you get gasoline and diesel with fine quality.
4. Environmental friendly. Our machine is full-enclosed, there is no any harmful smell come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge which can be use as bitumen or fuel.
5. 85% high recycling rate. This includes 6-8% diesel and gasoline mixture,80-85% base oil and 8-10% oil sludge.
6. Efficient vacuum systems: We have auto vacuum discharging system with 100% safety guarantee.
7. High quality refined oil with promising profits and market demand.

HUAYIN company is the only one who has a christian background, honesty is our principle, in the past 20 years, we do lots of job on product quality and our services, we won a good reputation from our customers. HUAYIN is a trustworthy friend for you. Need more information about waste tire recycling machine, please contact us.